Download Print this page

Wall Mounting; Specifications - Panasonic KX-TGA405 Installation Manual

Hide thumbs Also See for KX-TGA405:

Advertisement

TGA405(bundle)(e).fm Page 3 Thursday, February 4, 2010 10:12 AM
2
Confirm that the STATUS indicator and w indicator light green. (The unit is
ready for use.)
L If the indicators do not light green, re-position the unit in a place where the
indicators light green.
Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become disconnected.
L The unit can support a maximum of 2 handsets at a time.
L Up to 2 range extenders can be registered to the base unit.

Wall Mounting

Drive the screws (not supplied) into the wall. Mount the unit, then slide it down.
Note:
L Make sure that the wall is strong enough to support the weight of the unit.

Specifications

N Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)
N Frequency range: 1.92 GHz to 1.93 GHz
N RF transmission power: 115 mW (max.)
N Power source: 120 V AC, 60 Hz
N Power consumption: Standby: Approx. 1.0 W, Maximum: Approx. 1.8 W
N Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry)
Note:
L Design and specifications are subject to change without notice.
L The illustrations in these instructions may vary slightly from the actual product.
Screws
37.0 mm
(1
15
/
inches)
32
– 3 –

Advertisement

loading

This manual is also suitable for:

Kx-tga405c