Troubleshooting - Panasonic AG-CK10P Operating Instructions Manual

Troubleshooting

Starting up
Symptom
Power does not come on.
Unusual sound is heard.
During operating
Symptom
Video is distorted or not
recorded.
Recorded video is in black
and white.
Focusing does not work.
E-9
Confirmation Details
• Is the camera cable connected correctly?
Refer to the connections on page E-7.
• Some operating sounds may be evident when
powering on, switching IR modes and zooming.
Sounds in such cases do not necessarily
indicate a problem.
Confirmation Details
(Refer to the Operating Instructions of the Remote
Control Panel.)
• Are camera and video monitoring equipment
connected properly?
• Are both the video input connector selection
and the input selection made with the Remote
Control Panel the same?
• Are the video output settings correct for the
connected equipment? Connect a monitor to
the [VIDEO OUT] connector on the rear panel
of the Memory Card Video Recorder and check
the picture.
• The IR function was enabled, which results in a
B/W picture.
• Are you attempting to record video of scenes that
are hard to focus? In the following conditions,
focusing may be difficult.
examples are listed below:
• The field of view includes both distant and
near objects.
• The camera is shooting through dirty window glass.
• Ambient lighting is low.
• There are bright and reflective surfaces around
the object.
• The camera is shooting a rapidly moving object.
• The object has little contrast.
• A close-by object is being shot at high zoom ratio.
• The camera can also be focused manually. For
details, refer to the Operating Instructions of the
Remote Control Panel.