Panasonic AG-HMX100P Operating Instructions Manual page 23

Position setting values of patterns registered as direct
patterns
Changing Direct Patterns
[DIRECT PATTERN]
The effect and position settings applied to the respective
patterns registered as direct patterns are saved in memory
and applied when the patterns are called next time (if
Any settings made for the patterns not registered as
direct patterns are not saved in memory. In addition, when
a pattern is called, the setting values common to the
applicable patterns are displayed in the menu.
can be used to change direct pattern assignment to each
button.
Rotary 1 Rotary 2 Rotary 3
DIRECT
PATTERN SETUP
SETUP
DEFAULT
To change a direct pattern
1
Select [SETUP] using the rotary 2 control, and
press the key.
2
When the message [OK?] appears, press the
key again.
To stop the setting process, press the
while holding down the SHIFT key.
All the direct transition pattern buttons and direct
3
Press the direct transition (or key) pattern
button of the pattern you want to change.
4
Enter the number of the pattern you want to set
for transition or as the key using the numeric
keys in the numeric key area.
5
Rotary 4 Rotary 5
6
Example of DIRECT PATTERN TRANSITION
screen
key
Up to seven transition patterns can be stored.
It is also possible to change the settings for the edge
of each pattern or set and store effects for each pattern
(
The entered number is displayed at the position of
the pattern number.

Volume 2.
 NOTE
If the pattern corresponding to the entered number is
already assigned to other button, the button flashes.
In this case, return to Step 3, select the button, and
enter other pattern number.
Key patterns are assigned to the direct key pattern
buttons and transition patterns are assigned to the
direct transition pattern buttons. You cannot assign
any transition pattern to a direct key pattern button
or any key pattern to a direct transition pattern
button.
Slide the transition lever upward to check the
selected pattern on the monitor connected to
the SDI OUT PVW connector.
Press the key.
The display returns to the [SETUP] menu screen.
POS. X 128 Y 128
Z 196
EVENT ME TIME PATTERN
00 1:00 0016 WHT
E F
DIRECT PATTERN TRANSITION
MODIFY
OFF
PATTERN WIDTH
EDGE HARD 0
EFFECTS
OFF
INT
ENTER TO EXIT
COLOR
WHITE
23