Advertisement
1.0
General remarks and safety instructions
The offered "sIMPLEk-Stick"-assembly set (here called as "sIMPLEk-Stick") will be delivered in
individual parts and cannot be used in delivery conditions.
The assembly set is only allowed to be used by experts allowing for applicable regulations and
standards regarding the equipment.
The sIMPLEk-Stick is compatible with the following E-Bike engines:
•
Bosch (Classic Line, Active Line, Performance Line, Performance Line CX)
•
Yamaha (PW, PW-SE, PW-X, GIANT SyncDrive)
•
Brose
•
Impulse (2.0, EVO RS)
The completed assembly set, obstructed in a compatible E-Bike, causes the suspension of the factory-
integrated speed regarding the support of the motor.
Thus, the establishment of the completed assembly set, within the scope of the StVO, is forbidden and
not accepted.
The use of the assembly set is only provided for closed-off public traffics as well as for private grounds
and race courses.
Please put on a suitable helmet at all times!
The usage of the assembly set leads to the loss of warranty concerning the vehicle.
Regarding the installation of the E-Bike, please make sure not to damage any cables while installing
the protection cover of the motor. Thus, you can prevent electrical shorts which could lead to major
cable bruises or fires.
Liabilities for any damages will not be assumed (directly or indirectly) that may arise by activating the
completed assembly set.
Use at your own risk!
3
Advertisement
