Table of Contents
Advertisement
General Functions
Turning your handset on
Ensure that your USIM card is in your handset and the battery is
charged. Press the
key.
Enter the USIM PIN code that was supplied with your USIM card if
PIN code setting is on.
After a few seconds you will be registered on the network.
Turning your handset off
Press and hold the
key until power is off.
There may be some delay while the handset powers down.
Do not re-power the handset during this time.
Access Codes
You can use the access codes described in this section to avoid
unauthorised use of your phone. The access codes (except PUK and
PUK2 codes) can be changed by using the
Change codes feature
[Menu #.5.3]
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your USIM
card against unauthorised use. The PIN code is usually supplied with
the USIM card. When the PIN Code Request is set to Enable, your
29
Advertisement
Table of Contents
