Advertisement
Attach the KTI-5 to the repeater Accessory Cabinet using the supplied
cushion.
1. Attach 4 cushions on the 4 base corners of the KTI-5, and place it into
the Accessory Cabinet.
2. Attach the cushion to the base of the KTI-5, and attach it to the
Accessory Cabinet.
Cushion
oriEnTaTion
rear Panel
①
① DC Power supply connector cable (length: 2 m)
Connect to an external DC power supply.
② n SynC jack
Connect to Repeater.
③ lan jack
Connect to Ethernet. Use a shielded, Category 5e or higher
standard LAN cable shorter than 3 meters.
④ micro uSB connector
This connector is currently not used.
⑤ ConTrol i/o connector
This connector is currently not used.
Cushion
Indicator
Indicators (LAN)
②
③
④
Cushion
⑤
3
Advertisement
