Kenwood TK-290 Instruction Manual page 3

ATTENTION (U.S.A. Only):
The RBRC Recycle seal found on
cadmium (Ni-Cd) battery packs indicates
voluntary participation in an industry program to collect
and recycle Ni-Cd batteries after their operating life
has expired. The RBRC program is an alternative to
disposing Ni-Cd batteries with your regular refuse or
in municipal waste streams, which is illegal in some
areas.
For information on Ni-Cd battery
recycling in your area, call (toll free)
1-800-8-BATTERY (1-800-822-8837).
's involvement in this
KENWOOD
program is part of our commitment to
preserve our environment and
conserve our natural resources.
One or more of the following
statements may be applicable:
FCC WARNING
This equipment generates or uses radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly approved
in the instruction manual. The user could lose
the authority to operate this equipment if an
unauthorized change or modification is made.
ii
nickel-
KENWOOD
's
KENWOOD
INFORMATION TO THE DIGITAL DEVICE
USER REQUIRED BY THE FCC
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can
generate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that the interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the
•
equipment and receiver.
Connect the equipment to an outlet on a
•
circuit different from that to which the
receiver is connected.
Consult the dealer for technical assistance.
•