Wiring
Wiring and block diagram
The example in the following figure shows the terminal assignment and the assignment of
the channels to the addresses (output byte a and output byte b).
①
xL+
xM
Figure 3-1
Note
Upon activation of the 24 V supply voltage, there is a "1" signal at the module outputs for
approx. 50 μs.
14
Backplane bus interface
Supply voltage 24 V DC
Ground
Block diagram and terminal assignment
CHx
Channel or channel status LED (green)
RUN
Status display LED (green)
ERROR
Error display LED (red)
PWR
POWER supply voltage LED (green)
Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0)
Manual, 09/2016, A5E32364017-AC