Parameter Window Light - Extra Time Switch - ABB i-bus KNX Product Manual

Time receiver gps, tr/a 1.1

Hide thumbs Also See for i-bus KNX:

Table of Contents

ABB i-bus

KNX

Commissioning

3.2.14.3

Parameter window Light – Extra time switch

The settings for the extra switching times can be made in this parameter window. The window is visible

only when the Extra time switch parameter is set to Active in the Light control parameter window. The extra

switching times affect both threshold objects (Sends light above/below threshold 1 – Sending and Sends

light above/below threshold 2 – Sending).

Switch OFF

Options:

Inactive

Active

An additional "Off" period can be activated for brightness control with this parameter. An "Off" signal

is additionally sent via the output object of the time switch during this period, e.g. to switch off lighting

additionally during a certain period.

•

Inactive: The additional "OFF" period is deactivated.

•

Active: The following parameters are displayed.

TR/A 1.1 | 2CDC509082D0201 53

Table of Contents