Siemens SITRANS LG250 Operating Instructions Manual page 75

Guided wave radar, foundation fieldbus coax probe

Hide thumbs Also See for SITRANS LG250:

Table of Contents

Fig. 41: Schematic presentation function block Output Splitter

Function block Signal Characterizer

The function block "Signal Characterizer" has two channels the outputs of which are not in linear

relation with the respective input. The non-linear relation is defined by a look-up table with individu-

ally selectable x/y-pairs. The respective input signal is imaged on the corresponding output, hence

this function block can be used in a control loop or signal path. Optionally the function axis can be

exchanged in channel 2 so that the block can be also used in a reverse control loop.

PBD-51041056

SITRANS LG250 - Operating Instructions

Table of Contents