Sharp UP-3301 Programming Manual page 22

3. [3 Z REPORT COUNTER]
DISPLAY: Setting item menu screen
Select "3 Z REPORT COUNTER" and press the ENTER key.
DISPLAY: Z REPORT COUNTER screen
Select the report to be preset and enter the value
The content of displayed reports are as listed in the table below.
DISPLAY TEXT
TRANSACTION Z1 Transaction Z1 report counter
CONSOLI.TRAN. Z1 Consolidation transaction Z1 report
counter
SERVER Z1/Z2 Server Z1/Z2 report counter
HOURLY Z1 Hourly Z1 report counter
PLU Z1/Z2 PLU Z1/Z2 report counter
GLU Z1 GLU / PBLU Z1 report counter
DRIVE THRU Z1 Drive thru Z1 report counter
TRANSACTION Z2 Transaction Z2 report counter
CONSOLI.TRAN. Z2 Consolidation transaction Z2 report
counter
DAILY NET Z2 Daily net Z2 report counter
DEPARTMENT Z1 Department Z1 report counter
DEPARTMENT Z2 Department Z2 report counter
CONTENTS MRS
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
UP-3301UP SRV MODE PROGRAMMING ("2 SETTING")
4. [4 GT]
DISPLAY: Setting item menu screen
Select "4 GT" and press the ENTER key.
DISPLAY: GT COUNTER screen
Select the GT to be changed and enter the value
The content of cach GT are described in the table below.
DISPLAY TEXT
POSITIVE GT
NEGATIVE GT
TRAINING GT
GT1 is obtained by the following equation.
EQUATION: GT1 = GT2~GT3
Note: GT programming will be inhibited after the MRS3 operation.
The JOB#989 memory initial operation can be executed after the
MRS3 has been executed.
– 21 –
CONTENTS
GT2 (Positive GT) : Max.13 digits
GT3 (Negative GT) : Max.13 digits
TRAINING GT: Max.13 digits
MRS
0.00
0.00
0.00