Table of Contents
Advertisement
Remove the Insulating Strip from the Remote
Control
Remove the insulating mylar strip from the
battery if the battery is being used for the
first time. It is located at the bottom back
side of the remote control.
GB
Battery Installation for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in
the direction of the arrow.
2. Pull out the battery holder and remove
the old battery.
3. Replace with a new one battery.
4. Insert the battery holder back into the
remote control.
12
Advertisement
Table of Contents
