Part names and usage
qd Controller port
Connects with the commander interface
connector of the attached controller.
qf GPO indicator
These are eight indicators that are user-definable
TM
by PSP
software developers.
Unit rear
1
2
EXT
3
4
L
5
AUDIO OUT
R
1 Aerial
For wireless LAN use.
2 Extension connector
For use by service personnel only.
6
RF ( EXT )
7
8
DC IN
19.5V
9
qg Headset connector
The PSP-1000 series headphones with remote
control or a commercially sold headset (with a
stereo mini-plug) can be connected here.
qh GPI switch
These are eight dip switches that are user-
TM
definable by PSP
software developers.
3 Dedicated connector for servicing
For use by service personnel only.
Caution
Usage of this port may cause irreparable damage to the
system.
4 VGA connector
Connects to a device with a VGA IN connector.
5 AUDIO OUT connector
Connects to a device with an AUDIO IN
connector.
6 Vent fan
Vent for internal fan used to cool unit. Be sure
not to obstruct this vent, as doing so may cause a
fire. Also, to prevent any hindrance to air flow,
position the unit an adequate distance from walls.
7 RF (extension) connector
Connects to an access point using a coaxial cable.
8 Clamp
For securing the aerial and
AC adaptor to the unit.
9 DC IN 19.5V connector
For attaching the included AC adaptor.
9
Part names and usage