Using The Hdmi Input - Pioneer Kuro PDP-LX609A Operating Instructions Manual

12 Using with other equipment

Using the HDMI Input

The INPUT 4, INPUT 5 and INPUT 6 terminals are HDMI terminals to which digital
video and audio signals can be input. To use the HDMI terminal, activate the
terminal and specify the types of video and audio signals to be received from the
connected equipment. For the types of these signals, see the operation manual
that came with the connected equipment.
Before starting the menu, press INPUT 4, INPUT 5 or INPUT 6 on the remote
control unit or press INPUT on the flat screen TV to select "INPUT 4", "INPUT 5"
or "INPUT 6".
Video signals supported
720 (1440) x 576i@50 Hz
720 x 576p@50 Hz
1280 x 720p@50 Hz
1920 x 1080i@50 Hz
720 (1440) x 480i@59.94 Hz/60 Hz
720 x 480p@59.94 Hz/60 Hz
1280 x 720p@59.94 Hz/60 Hz
1920 x 1080i@59.94 Hz/60 Hz
1920 x 1080p@24 Hz
1920 x 1080p@50 Hz
1920 x 1080p@60 Hz
PC signals supported
640 x 480 (VGA) 60 Hz
800 x 600 (SVGA) 60 Hz
1024 x 768 (XGA) 60 Hz
1360 x 768 (Wide - XGA) 60 Hz
1280 x 1024 (SXGA) 60 Hz
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
HDMI Control supported
The flat screen TV supports the HDMI Control functions. By connecting devices
that support the HDMI Control functions to the flat screen TV, you can control the
connected device(s) from the flat screen TV or remote control unit of the flat
screen TV. See Using the HDMI Control on Chapter 13.
Deep Colour supported
Deep Colour means the colour depth that describes the number of bits used to
represent the colour of a single pixel in a bitmapped image. Besides the
conventional RGB/YCbCr16 bit/20 bit/24 bit signals, the flat screen TV also
supports RGB/YCbCr30 bit/36 bit signals. This enables finer, minute colour
reproduction when a device that supports Deep Colour signals is connected to
the flat screen TV. When Deep Colour signals are received, the colour depth
appears on the InfoBanner (see page 35).
Note
• It may take a short while until the image is displayed, depending on the
equipment connected.
• Make sure to use an HDMI compliant cable.
• When inputting 1080p signals, we recommend you use an HDMI cable that
supports HDMI Category 2.
• When connecting a PC to the HDMI terminal, use the HDMI compliant PC or
video card.
• When connecting a PC to the HDMI terminal using a DVI output terminal, the
flat screen TV may not display properly. If that is the case, consult with your
PC manufacturer.
48
En
• PC picture and/or sound may not be displayed or heard properly depending
on the PC used.
Connecting HDMI equipment
When using the INPUT 4 HDMI terminal:
T
W
Rear view
HDMI compliant cable
(HDMI cable having
the HDMI mark)
HDMI device
When using the INPUT 6 HDMI terminal:
T
W
Rear view
HDMI compliant cable
(HDMI cable having
the HDMI mark)
HDMI device
T
W
Stereo audio
cable
T
W