Error Messages - Fujitsu Arrows NX F-01J Instruction Manual

■ Bluetooth
● The terminal cannot be connected to a Bluetooth device/
A Bluetooth communication device cannot be found
from the terminal
Make Bluetooth device (commercially available)
detectable and then register the device on the terminal. If
you delete already registered device and register the
device again as a new device, delete the registrations on
both the terminal and Bluetooth device (commercially
available), and then perform registration of the devices.
● Calls cannot be made from the terminal connected to an
external device such as car navigation or handsfree
device
If calls are made several times when the other party does
not answer or is out of service, the call to this number
may be disabled. In this case, turn the terminal OFF and
ON.
■ Maps/GPS function
● Cannot set AUTO-GPS service information
•
Is AUTO-GPS function disabled due to battery low? If
AUTO-GPS is disabled by Low-power operation
settings, AUTO-GPS service information cannot be set.
In this case, set Lower-power operation settings to [Not
suspend] or charge the battery.→P34 , P150
•
Mark [AUTO-GPS] operation settings.→P150
•
Is the GPS function OFF? When the GPS function is OFF,
AUTO-GPS function stops.→P113
■ Others
● Data saved in USB mass storage is not displayed
Reattach the USB mass storage.
● Commercially available external devices (USB mouse,
keyboard, etc.) are not recognized
If you use a microUSB adapter (commercially available),
connect microUSB adapter to the external device, and
then connect to the terminal.

◆ Error messages

● Memory space is full
The terminal is low on memory. If you keep using, some
functions and applications may not be operated.
Open setting screen to select unnecessary apps, then
press "Uninstall" to uninstall them.
Displayed when available memory of the terminal is low.
Tap [Setting screen] to delete unnecessary applications.
Alternatively, end running applications or clear cache of
applications to increase memory space.→P53, P152
● Cannot activate iris device
It appears when the camera for iris authentication does
not work properly. If the camera for iris authentication is
disabled even if you turn the power off and on, please
contact a docomo Shop near you.
● All voice services are blocked./Voice service is
blocked./Emergency service is blocked./Data service
is blocked.
Phone line or packet communication facilities are broken
down or line or packet communication network is very
busy. Wait a while and then operate again.
182
Appendix/Index