5. To install a new storage drive in a type
bracket with the corresponding holes in the drive.
Note: If you are installing a 2.5-inch hard disk drive, ensure that the circuit board faces downward and
the connectors
2
face toward the rear of the bracket.
Figure 75. Installing the storage drive into the type
6. Slide the bracket with the new storage drive into the storage drive bay until it snaps into position.
Figure 76. Installing the type
2
bracket, flex both sides of the bracket and align pins
2
bracket
2
storage drive bracket
.
Chapter 7
Hardware removal and installation
1
on the
97