Advertisement
To switch OFF, press and hold
5.
will switch itself OFF after a user-settable interval (default 2 minutes) from the last button
press or RS232 activity.
The battery status will be shown for 3 seconds each time the instrument settings are
Note:
changed. Change the batteries immediately when 1 bar is shown, as < 10% of life
remains. See note below regarding clock.
Ts and Δ-T will only be displayed if the auxiliary surface temperature sensor is
Note:
connected to the socket in the right hand side of the instrument and this later is set to
"ON" (see above). Otherwise, the lower display will show "OFF" changing to "—" after
3 seconds
.
Should successive readings on both halves of the display not change, the upper display
Note:
decimal is flashed to show that new readings are still being taken.
4
Function Tables
See Table 3 on the next page for Spot Measurements.
GE Protimeter Hygromaster
until display shows 'OFF.' Alternatively, the instrument
Page 7
Hide quick links:
Advertisement
