Two Calls: Receiving A New Call; Two Calls: Making A Transfer - Mitsubishi Electric M4 Social User's Operation Manual

5.5.4 TWO CALLS: RECEIVING A NEW CALL

This situation is submitted to network capacities and subscription options.
Two Calls + Waiting: display
The display is the same as for a waiting call described above.
5.5.4.1 T + W
WO CALLS
You have the choice between:
• Either reject the waiting call (Press on
• Replace the current active call by the new one (Press on
• Swap the two connected calls (Press on
• End connected calls (Press on

5.5.5 TWO CALLS: MAKING A TRANSFER

A transfer can be performed only between single connected calls. The transfer is initiated by the following
means:
Either by the SS string
Or by the actions menu Transfer item.
While making a new call, you can make a transfer between the call already connected and the new one being
called. The transfer operation is made using the Transfer softkey when displayed (The transfer is only possible
when the new called user is being alerted.
5.5.5.1 T (
RANSFER NORMAL CASE
The operations are as follows:
L2 Two calls screen:
Calls with René and John.
René
John
Names Menu
Making a transfer between the two calls
4 SEND
Transition screen
The transfer is being completed between René and John.
Please wait...
Cancel
"Transfer completed"
Information screen
The transfer is complete between René and John.
Transfer complete
Exit
Exit
.
CONFIDENTIAL
: D
AITING IRECT ACTIONS
Rej. softkey),
key),
SEND
key).
END
4 SEND,
)
Mitsubishi Electric
Repl . Softkey),
Page 66/102