Tag Type Selection - Siemens SIMATIC RF310M Operating Instructions Manual

Simatic sensors rfid systems mobile reader

Hide thumbs Also See for SIMATIC RF310M:

Table of Contents

SIMATIC RF310M software

6.7 The functions in the "Extras" menu

6.7.4

Tag Type Selection

Figure 6-18

Memory size of the tag to be edited

Set the memory size of the tag using "Extras" > "Tag Type Selection" (or <Ctrl+S or

<ALT+X+T>). Possible settings:

● 20-byte EEPROM

● 8K Byte FRAM

● 32K Byte FRAM

● 64K Byte FRAM

This setting also defines the memory area in the editor. It is not possible to access tag

memory addresses beyond the memory size.

Memory areas (read/write memory) see the System Manual "Transponders", Chapter

"Features" of the relevant tag.

Tag Type Selection

Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618

SIMATIC RF310M Mobile Reader

Table of Contents