Canon ColorPASS-Z5000 Color Manual page 100

4
4-4 ColorWise Pro Tools
2. Select the profile you want as the default for a profile type, and click Profile Settings.
3. In the Profile Settings dialog box, click Default and click Apply.
Profile Settings dialog box
for Simulation (left) and
Output (right)
4. Click OK.
5. In the main Profile Manager window, the target icon appears next to the new default
The left side of the screen lists the ICC profiles in the default directory of your
computer. The right side lists each of the three types of profiles on the ColorPASS.
The lock icon ( ) to the left of a profile name indicates that the profiles cannot be
deleted and can be edited only if it is saved under a new name. Only Simulation and
Output profiles can be edited.
A small icon to the left of a profile name indicates the default profile for each category
(RGB Source, Simulation, and Output). If you designate a different profile as the
default, the icon appears next to your designated profile. The icon indicating the
default RGB Source and Output profiles looks like a target (
the default Simulation profile changes in appearance depending on whether the default
RGB Separation setting is set to Simulation (
profile you specified. Repeat steps 2 through 4 for each type of profile.
If no default is set for RGB Source, then the RGB Source print option is set to None.
If no default profile is set for Simulation, then the CMYK Simulation print option is
set to None. For more information on print options, see Chapter 1.
). The icon indicating
) or Output ( ).