Nokia 6710 Navigator User Manual page 70

Accessories
Attach the mounting device
Before you attach the mounting device to the windscreen,
locate a safe mounting surface on the windscreen, and clean
the surface thoroughly with a glass cleaner and a clean towel.
If the ambient temperature is below +15°C (60°F), carefully
warm the surface and the suction cup with a hair dryer to
ensure a firm grip on the windscreen. Ensure that you do not
heat the windscreen excessively to avoid damage to it.
Press the suction cup of the
mounting device gently
against the windscreen, and
rotate the mounting device
clockwise to create a vacuum
between the suction cup and
the windscreen. Check that the
suction cup is firmly attached.
70
Cyan Cyan
Place or remove the device
Do not place or remove a
mobile device while driving. To
place your device into the
holder, close the slide of the
device, push the catch at the
top of the holder, and slide the
mobile device into the holder.
To charge the battery of your
device, use a compatible
charger. To attach the charger
cable to the back of the holder,
insert the cable through the
slot into the cable support, and connect the charger plug to
the charger connector at the top of the device.
To remove the device, close the
slide of the device, push the
catch, and slide the device out
from the holder by pushing it
from the bottom.
Magenta Magenta Yellow Yellow Black Black
www.nokia.com/support