Call Waiting; Options During A Call - Nokia N-Gage User Manual

Call waiting

If you have activated the call waiting network service, the network will notify you
of a new incoming call while you have a call in progress. See "Call waiting" on
page 39.
1 During a call, press
The first call is put on hold.
2 To switch between the two calls, press Swap.
3 To end the active call, press
Tip: If you have activated the Call forwarding > If busy function to
forward calls, for example, to your voice mailbox, rejecting an incoming
call also forwards the call. See "Call forwarding settings" on page 18.

Options during a call

Your game deck includes a comprehensive list of menu options that are available
for handling phone calls. Some options apply only to specific network services that
you may or may not have active, such as conference calling.
Press Options during a call for some of the following
options:
Mute or Unmute, End active call, End all calls, Hold
or Unhold, New call, Conference, Private, Drop
participant, Answer, and Decline.
Swap is used to switch between the active call and
the call on hold.
Transfer is used to connect an incoming call or a call
on hold with an active call and to disconnect
yourself from both calls.
Send touch tone is used to send DTMF tone strings,
for example, passwords or bank account numbers.
Glossary: DTMF tones are the tones you hear when you press the number
keys on the game deck keypad. DTMF tones allow you to communicate
with voice mailboxes and computerized telephony systems, for example:
1 Key in the digits with keys
Each keystroke generates a DTMF tone that is transmitted during the call.
Press
seconds before or between DTMF characters, and w which causes the
remaining sequence to wait until you press Send during the call. Press
to produce #.
Nokia #### User Guide
to answer the waiting call.
repeatedly to produce *, p which inserts a pause of about two
Using your game deck as a phone
.
to .
&
Copyright © Nokia 2003