Zanussi ZWF 81243W User Manuals
Zanussi ZWF 81243W User Manuals

Zanussi ZWF 81243W User Manuals

Hide thumbs Also See for ZWF 81243W:

Advertisement

Quick Links

User Manual
GETTING
STARTED?
EASY.
ZWF 81243W
EN User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWF 81243W

  • Page 1 User Manual GETTING STARTED? EASY. ZWF 81243W EN User Manual Washing Machine...
  • Page 2: General Safety

    SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 3: The Appliance

    The appliance must be connected to the water mains using the • new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be •...
  • Page 4: Product Description

    SERVICE • To repair the appliance contact an Authorised WARNING! Risk of injury, electrical Service Centre. shock, fire, burns or damage to the • Use original spare parts only. appliance. DISPOSAL • This appliance is for household use only. • Follow the safety instructions on the detergent WARNING! Risk of injury or packaging.
  • Page 5 • Turn the device clock- wise, until the groove is horizontal. You cannot close the door. • To close the door, turn the device anti- clockwise until the groove is vertical. FIXING PLATE KIT (4055171146) Available from your authorised dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates.
  • Page 6 EASY START CONTROL PANEL DESCRIPTION Cotton 90° 1200 Jeans Cotton 60° Duvets Synthetics 40° 30° Refresh Delicates 20min Wool/ Easy Iron Handwash Spin Mix 20° Drain Rinse Programme knob Super Quick button (Quick) Display Rinse Hold button (Rinse Hold) Delay Start button (Delay Start) Spin reduction button (Spin) Temperature button (Temp) Door locked indicator...
  • Page 7: Programme Chart

    – You change the programme while it • The display shows the message operates. some seconds if: – You set a option that is not suitable for the programme. PROGRAMME CHART Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed Cotton...
  • Page 8 Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 30'@ 30° 3 kg A short cycle for synthetic and delicate items with 30°C 700 rpm light soil level or for items to freshen up. 1) Standard programmes for the Energy Label consumption values.
  • Page 9: Consumption Values

    Programme Spin Rinse Hold Quick Extra Rinse Delay Start ■ 30'@ 30° 1) When you set the Quick option, we recommend that you decrease the quantity of the laundry. It is pos- sible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 4 kg, synthetics and delicates: 1,5 kg.
  • Page 10: Before First Use

    OPTIONS TEMP Set this option for items with light soil or items to refresh. With this option you can change the default temperature. EXTRA RINSE Indicator = cold water. With this option you can add some rinses to a The indicator of the set temperature comes on. washing programme.
  • Page 11: Daily Use

    DAILY USE Compartment for liquid additives WARNING! Refer to Safety chapters. (fabric conditioner, starch). CAUTION! Do not LOADING THE LAUNDRY exceed the MAX Open the water tap. Connect the mains plug to the level. mains socket. 1. Pull the door handle to open the appliance Flap for powder or liquid deter- door.
  • Page 12 When the flap is in posi- You can cancel or change the set of tion B and you want to the Delay Start option before you use powder detergent: press the button Start/Pause. After 1. Remove the drawer. pressing the button Start/Pause you 2.
  • Page 13: Hints And Tips

    4. Close the door and touch the button Start/ • You must drain the water to open the door. Pause again. The programme (or the Delay Draining the water: Start) continues. 1. To drain the water. • Set a Drain or a Spin programme. AT THE END OF THE PROGRAMME •...
  • Page 14: Care And Cleaning

    • Do not mix different types of detergents. • To use the correct quantity of detergent, check • To help the environment, do not use more than the water hardness of your domestic system. the correct quantity of detergent. Refer to "Water hardness". •...
  • Page 15: Troubleshooting

    CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump.
  • Page 16 POSSIBLE FAILURES Problem Possible solution The programme does not • Make sure that the mains plug is connected to the mains socket. start. • Make sure that the appliance door is closed. • Make sure that there is not a damaged fuse in the fuse box. •...
  • Page 17: Technical Data

    Problem Possible solution The washing results are • Increase the detergent quantity or use a different detergent. not satisfactory. • Use special products to remove the stubborn stains before you wash the laundry. • Make sure that you set the correct temperature. •...
  • Page 18 the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
  • Page 20 WWW.ZANUSSI.COM/SHOP...

Table of Contents