DISASSEmBLE SEPARATOR (UW, BC)
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1.
Remove the separator from the unit (See
page 4-3)
2.
Remove the 12 screws that hold the separa-
tor halves together.
Separator
Screws
3.
Open the two halves to access the lower
zone temperature display thermistor.
4.
(UW): Lift the foam insert to access the up-
per zone temperature display thermistor.
(BC): This will be the thermistor for the mid
zone on the Beverage Center.
4-28