Table of Contents
Advertisement
9.4
First ring
Your AC1001C will automatically detect the Caller identification (Subscription
dependent). If you do not wish to hear the ring before the caller identification is displayed
you can manually set
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
First Ring
d
u
4. Scroll
or
to
Off
e
5. Press
to return to standby.
9.5
Change the System PIN
The System PIN is required when changing certain settings and for registration / de-
registration. The default setting is 0000. You can change this to your own preferred number
(up to 8 digits).
When you enter a PIN, the digits are shown as ****.
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
System PIN
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
e
7. Press
to return to standby.
NOTE
It is advisable to make a note of your new PIN code and keep it somewhere safe.
9.6
Restore default settings
You can restore the AC1001C to its default (original) settings. Resetting the AC1001C will
not affect the phonebook or Calls list, and all cordless units registered to the base will be
retained. Only the cordless unit and base settings will be reset.
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
Master Reset
4. Select
Yes
to confirm or
5. Enter the System PIN (Default setting = 0000) then press OK. The display will show
Reset Complete
and the conferencing unit will restart automatically.
32
First Ring
to Off. The default setting is Off.
d
to
Settings
and press Select.
and press Select.
and press Select.
or
On
then press Select.
d
to
Settings
and press Select.
and press Select.
and press Select.
d
to
Settings
and press Select.
and press Select.
and press Select.
No
to cancel.
Base settings
Advertisement
Table of Contents
