Event Reporting - Motorola Symbol PL4507 Integration Manual

6 - 18 Symbol PL4507 Decoder Integration Guide

Event Reporting

The host can request the decoder to provide certain information (events) relative to the decoder's behavior. Enable
or disable the events listed in
Event Codes
Table 6-4
Event Class
Decode Event
Boot Up Event
Parameter Event
Decode Event
Parameter # F0h, 00h
When enabled, the decoder generates a message to the host upon a successful bar code decode. When disabled,
no notification is sent.
Enable Decode Event
Table 6-4 and on the following pages by scanning the appropriate bar codes.
Event
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is
enabled by default)
Number expected
(01h)
Code Reported
0x01
0x03
0x07
0x08
0x0A
0x0F
*Disable Decode Event
(00h)