Motorola MDC400 User Manual page 19

Loop Recording
Exposure
Motion
Detection
G-Sensor
Park mode
Record audio
Settings
Loop Recording allows your
camera to overwrite old files with
new files. Once the memory card
becomes full, the camera will
delete the first video file to make
room for the latest file. Choose the
default duration for each
recording cluster: 1 Minute / 3
Minutes / 5 Minutes / Off
Used to adjust exposure level for
different light conditions. You can
adjust the exposure as you require.
Press the Up button if you need
the photos to be clearer or Down
button if you need it to be darker.
Enable or disable motion
detection
G Sensor detects forces which will
automatically protect the current
recording in the event of a
collision. You can change the
sensitivity of the sensor. It is set to
Low by default, but can be set to
Off/High/Medium/Low.
If you turn the sensor off, your
dashboard camera will not be able
to permanently save any footage.
Enable or disable parking mode.
Enable or disable microphone.
19