Verifying The Installation; System Power-On - Huawei SmartLogger1000 Quick Manual

1. Connect one end of the delivered network cable to the Ethernet port of a device.
2. Connect the other end of the network cable to the FE port of the SmartLogger.
9

Verifying the Installation

No. Check That
1 The SmartLogger is properly installed.
2 All cables are properly connected, without open circuits or short circuits.
Routing for the power cable and signal cable meets the requirements for
3 routing strong-current and weak-current cables and complies with the
cable routing plan.
Cables are bound neatly, and cable ties are secured evenly and
4
properly in the same direction.
5 There is no unnecessary adhesive tape or cable tie on cables.
10

System Power-on

1. Insert the output terminal of the power adapter into the POWER port of the SmartLogger.
2. Insert the power cable plug into an AC socket.
NOTE
Log in to the liquid crystal display (LCD) or embedded web user interface (WebUI) of the SmartLogger
to view its running status and device connections. For details, see the SmartLogger1000 User Manual.
14
Check Result
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed