Advertisement
2. Product Installation
Before installing a module in the WORKABOUT PRO4, all power sources must be turned off.
Remove the battery. If your unit is using AC power, disconnect it.
Figure 2-1 Battery location
With the power shut down, you can now install the AMERICAN RFID Module UHF CIRCULAR.
Remove the existing endcap and pod or backplate
Figure 2-2 WAP4 Disassembled
© 2014 Motorola Solutions, Inc. All Rights Reserved.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..
March 20, 2014
8073681 C
Advertisement
