Safety; General Safety; Safety And Instructional Decals - Toro Power Clear 518 Operator's Manual

Safety

General Safety

This machine complies with ANSI B71.3 specifications.
•
Read and understand the contents of this
Operator's Manual before you start the engine.
Ensure that everyone using this product knows
how to use the product and understands the
warnings.
•
Do not put your hands or feet near moving
components on the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting/dismemberment hazards of hand or foot, impeller
and auger—do not place your hand in the chute; remove
the ignition key and read the instructions before servicing
or performing maintenance.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, impeller—shut off the engine
and wait for the auger to stop before leaving the machine.
3. Thrown object hazard—keep bystanders a safe distance
away from the machine.
117-6047
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep clear of any discharge opening. Keep
bystanders a safe distance away from the
machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Shut off the engine before unclogging, servicing,
or fueling the machine.
You can find additional items of safety information in
their respective sections throughout this manual.
1. Primer
decal117-6047
2. Push the primer 2 times to
prime the engine.
3. Push in the key to switch
the engine on.
117-7713
4. Fuel spill hazard—do not tip machine forward or backward.
5. To engage the auger, squeeze the control bar.
6. Release the control bar to disengage the auger.
3
120-0149
4. Pull the key to switch the
engine switch off.
5. Remove the key to lock
the machine.
6. Read the Operator's
Manual before checking
the engine-oil level.
decal120-0149
decal117-7713