How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation; Dehumidifying Operation - Pioneer RG57A6 Owner's Manual

How to use the buttons

2
3
ON/OFF
SILENCE
FP
1. In the Auto mode, the air conditioner can logically
1
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
2. For the AUTO mode, fan speed can not be selected
SWING DIRECT
SLEEP
3. If the Auto mode does not provide the desired comfort
TURBO SELF
LED FOLLOW
CLEAN ME
2
4
ON/OFF
SILENCE
FP
1
TIMER
MODE
ON
TEMP
3
TIMER
FAN
OFF
SLEEP SWING DIRECT
TURBO SELF
LED FOLLOW
CLEAN
ME

Auto operation

Ensure that the system is powered. The
OPERATION indicator on LED display of the
indoor unit will start flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
O O
be set within a range of 62 F~ 86 F in 1 F
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
Fan speed is automatically controlled in Auto Mode.
levels, other suitable modes should be selected.
Cooling /Heating/Fan operation
Ensure that the system is powered. The
OPERATION indicator on LED display of the
indoor unit will start flashing.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 62 F~ 86 F in 1 F O O
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
While using the FAN mode, the temperature setting
will not be displayed on the remote and the room
temperature settings will be inaccessible. Therefore
only the steps 1, 2 and 4 above can be operated.
How to use the buttons
O
3
ON/OFF
SILENCE
FP
1
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SWING DIRECT
SLEEP
TURBO SELF
LED FOLLOW
CLEAN
ME
O

Dehumidifying operation

Ensure that the system is powered. The
OPERATION indicator on LED display of the
indoor unit will start flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
can be set within a range of 62 F~ 86 F in
1 F increments. O
3. Press the ON/OFF button to start the air
2
conditioner.
NOTE
For the DEHUMIDIFICATION mode, fan speed can not
be selected. Fan speed is automatically controlled in
Dehumidification Mode.
O O