Brother PA-TDU-001 Quick Setup Manual page 15

Key Parameter
(admin Security Disable
1
key)
(Continued)
Configuration
1
[ ] (admin key) can be accessed only when touch panel A (basic control panel) is set.
2
This function is available with firmware version 1.04 or later.
The newest version can be downloaded from the support website (Brother Solutions Center).
http://support.brother.com/
NOTE
• Some settings may differ depending on the firmware (printer software).
• A password can be specified so that basic settings specified by pressing [
cannot easily be accessed. For details on specifying the settings, see the User's Guide
included on the CD-ROM.
• If you do not remember the password, use [Device settings] in the "Printer Setting Tool" to
return all settings to their factory defaults or specify the password again and apply it. For
details, see the User's Guide included on the CD-ROM.
• If you want to reset the settings, use [Device settings] in the "Printer Setting Tool" to return
all settings to their factory defaults. For details, see the User's Guide included on the CD-ROM.
14
On/Off
Edit
Lock On/Off
Settings
Admin On/Off
Password
Enter Password:
**** (4 digits)
Printer/ProgVer/
FontVer/Memory
Settings
Select whether or not label
layouts can be edited.
Allow or disable setting changes
for [
Set password access for [
(admin key).
Type in the 4-digit password.
Displays the model name,
firmware version, font version
and amount of built-in memory.
Description
] (settings key).
]
] (admin key)