ABB REB650 Manual page 72

Section 3
DNP3 protocol implementation
66
3.9 ANALOG INPUTS Capabilities
Static (Steady-State) (leave tick-boxes blank if
Group Number: 30 this data type is not
Static Frozen Group supported)
Number: 31
Event Group Number: 32
Frozen Analog Input
Event Group Number: 33
Deadband Group
Number: 34
○ A: Only most recent
frozen value
○ B: All frozen values
○ Based on point Index
(add column to table in
part 5)
3.9.11 Analog Inputs Event Buffer Organization: When event buffers are allocated per object group (see
part 1.7.6), indicate the number of events that can be buffered for Analog Inputs. If event buffers are not
● Fixed at 1000
○ Configurable, range
_______ to _______
○ Configurable,
selectable from
____,____,____
○ Configurable, other,
describe:
3.9.12 Frozen Analog Inputs Event Buffer Organization: When event buffers are allocated per object
group (see part 1.7.6), indicate the number of events that can be buffered for Frozen Analog Inputs. If
event buffers are not allocated per object group then set "Fixed at 0".
○ Fixed at 1000
○ Configurable, range
_______ to _______
○ Configurable,
selectable from
____,____,____
○ Configurable, other,
describe:
Current Value If configurable, list
methods
Not Supported
Not Supported
1MRK 511 419-UUS A
650 series 2.2 ANSI
Point list manual