Silvercrest RT2000 BT Operating Manual page 19

The device adjusts to the stroke of your radiator valve.
For this purpose, the radiator valve is opened and
closed several times so that the device learns the end
points. This process may take a few minutes under
certain circumstances.
cases. The continuous thread turns and tightens the
pressure piece. Restart the adaptation, if necessary.
After successful adaptation, the device goes into Au-
tomatic mode.
Due to the continuous thread, the
pressure piece fi tted on the underside
can drop out if the regulator has not
been mounted on the valve. Fit the
pressure piece back in place in such
21
