Pioneer SC-LX901 Product Reference Manual page 29

Advanced Control
Firmware Update/Network Setup via Web Control
LX901 LX801 LX701 LX502
By entering the AV receiver's IP address on the web browser, you can
access the Web Control function for firmware update or change the
AV receiver's network settings. You can also set up Pandora
accounts, edit the friendly name, set up AirPlay password, and
identify the AV receiver for the Control4 system using the PC
keyboard.
Network Setup via Web Control
Standby Pass-Through with CEC
LX901 LX801 LX701 LX502
When Control with HDMI is turned on, standby pass-through
transmits audio and video signals from a HDMI-connected
component and outputs to TV via HDMI, even when the AV
receiver is on standby.
Standby Pass-Through without CEC
LX901 LX801 LX701 LX502
With standby pass-through, the AV receiver can pass audio
and video signals via HDMI even during standby. This feature is
useful when you want to access HDMI-connected components
without turning on the AV receiver.
* Control with HDMI needs to be turned off
Standby Pass-Through
HDMI Standby Input Switching
LX901 LX801 LX701 LX502
The function switches input source when the primary signal is cut
off, and switches back to the primary input when the primary
signal reappears.
Auto Power Off
LX901 LX801 LX701 LX502
The AV receiver will automatically turn off after being left
uncontrolled for a certain time set by the user. This function is
available for each zone.
Power Save for HDMI Standby Through
LX901 LX801 LX701 LX502
Power Save for HDMI Standby Through reduces energy
consumption while the AV receiver is on standby.
29
AV RECEIVERS REFERENCE GUIDE