Panasonic PAN9420 Product Specification page 13

Fully embedded stand-alone wi-fi module
Hide thumbs Also See for PAN9420:
Table of Contents

Advertisement

Type
WLAN Baseband
WLAN Radio
WLAN Encryption
Product Specification Rev. 1.1
Features
802.11n 1x1 SISO (WLAN SoC with SISO RF radio)
Backward compatibility with legacy 802.11b/g technology
PHY data rates up to 72.2 Mbps
20 MHz bandwidth/channel
Modulation and Coding Scheme MCS 0 ~ 7
Radio resource measurement
Optional 802.11n SISO features:
 1 spatial stream (STBC) reception and transmission
 Short guard interval
 RIFS on receive path for 802.11n packets
 802.11n greenfield Tx/Rx
Integrated direct-conversion radio
20 MHz channel bandwidth
Embedded WLAN Radio SoC with the following features:
 Direct conversion radio (no need for external SAW filter)
 2.4 GHz TX/RX switch, Power Amplifier (PA) and Low Noise Amplifier
(LNA) path
 Gain selectable LNAs with optimized noise figure and power
consumption
 Power Amplifiers with power control
 Optimized TX gain distribution for linearity and noise performance
 Fine channel step with AFC (adaptive frequency control)
Embedded WLAN Radio SoC with the following features:
 WEP 64-bit and 128-bit encryption with hardware TKIP processing
(WPA)
 AES-CCMP hardware implementation as part of 802.11i security
standard (WPA2)
 Enhanced AES engine performance
 AES-Cipher-Based Message Authentication Code (CMAC) as part of
the 802.11w security standard
PAN9420 Wi-Fi Module
3
2 Overview
Page 13

Advertisement

Table of Contents
loading

Table of Contents