Xcommand Usermanagement Remotesupportuser Getstate; Xcommand Usermanagement User Add - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xCommand UserManagement RemoteSupportUser GetState

Retrieves the state of the generated remote support user, if one exists.
Requires user role: ADMIN
USAGE:
xCommand UserManagement RemoteSupportUser GetState
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand UserManagement User Add

Adds a new user to this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Add [Active: Active] [ClientCertificateDN:
"ClientCertificateDN"] [Passphrase: "Passphrase"] [PassphraseChangeRequired:
PassphraseChangeRequired] [PinChangeRequired: PinChangeRequired] [Role: Role]
[ShellLogin: ShellLogin] Username: "Username" [YourPassphrase: "YourPassphrase"]
where
Active
: Literal (False / True)
Specifies whether this is an active user or not.
ClientCertificateDN
: String (0..255)
Identifies a user who logs in with a client certificate instead of a username and
password.
Passphrase
: String (0..255)
Specifies a Passphrase for the user.
PassphraseChangeRequired
: Literal (False / True)
Specifies whether the user's passphrase requires changing or not.
PinChangeRequired
: Literal (False / True)
Specifies whether a user's PIN requires changing or not.
Role
: Literal (Admin / Audit / Integrator / RoomControl / User )
Sets the user's role.
ShellLogin
: Literal (False / True)
Specifies whether the user should have a shell login or not.
Username
: String (0..127)
Specifies the user's username.
YourPassphrase
: String (0..255)
The user's passphrase.
135
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.