Rear Spacers - Husqvarna QR2645WQR2645XQR2640W User Manual

8.4 Removing the transport
support
Your appliance is equipped with
transport support to secure the door
during transportation.
1. Open the door.
2. Remove the transport support from
the door sides.
3. Remove the transport support from
the lower hinge (some models).
CAUTION!
Some models are fitted with
a silencing pad under the
cabinet. Do not remove this
pad.
3

8.5 Rear spacers

Install the two spacers and the locking
pins provided within the accessory bag
as shown in the figure.
8.6 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the feet
using the adjustment spanner supplied.
Door alignment is dependent on proper
levelling.
8.7 Installation of the Clean Air
Control filter
CAUTION!
The filter should be handled
carefully so fragments do
not loosen from the surface.
Make sure that the air lever
flap is closed to obtain
proper function.
The Clean Air Control filter is an active
2
carbon filter which absorbs bad odors
maintain the best flavour and aroma for
all foodstuffs without risk of odor cross
contamination.
On delivery the carbon filter is in a plastic
bag to preserve performance.
1. Open the air lever flap.
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot found in
the back of the air lever flap.
4. Close the air lever flap.
ENGLISH 15