LG 19LV2500 Owner's Manual page 59

Setting
Color Gamut
Advanced Control (
Maximizess the utilization of color to increase color quality.
Expert Control (
Displays color domain of the signal.
Edge Enhancer
Shows clearer and distinctive yet natural edges of the video.
This function is enabled in "Picture Mode - Expert".
xvYCC This is produces richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Color Filter This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Expert Pattern
This is the pattern used for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
Color Temperature Adjusts the overall color of the screen by changing the white baseline.
Plasma
LCD
Color Management
As the tool used by the experts to make adjustments by using the test patterns, this does
System not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/
Blue/Cyan/Magenta/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.
This feature is disable in RGB-PC and HDMI-PC mode.
LCD )
»
Standard: Displays standard set of colors.
»
Wide: Increase number of colors used.
,
Plasma LCD )
»
Standard: Displays standard set of colors.
»
Wide: Increase number of colors used.
»
EBU: Mode to display EBU standard color area. (
»
SMPTE: Mode to display SMPTE standard color area. (
»
BT709: Mode to display BT709 standard color area. (
a. Gamma : Select 1.9,
2.2, 2.4
b. Method : 2 Points
y
Pattern: Inner,
Outer
y
Red/Green/
Blue Contrast,
Red/Green/Blue
Brightness
d. Apply to all inputs
CUSTOMIZING SETTINGS
Description
LCD )
LCD )
)
LCD
c. Method : 20 Point IRE
y
IRE (Institute of Radio Engineers) is the
unit to display the size of the video signal
and can be set among 0, 5, 10, 15 - 100
Plasma TV. You can adjust Red, Green or
Blue according to each setting.
y
Red/Green/Blue: The adjustment range is
-50 - +50.
c. Method : 10 Point IRE
y
Pattern: Inner, Outer
y
IRE (Institute of Radio Engineers) is the
unit to display the size of the video signal
and can be set among 10, 20, 30 - 100. You
can adjust Red, Green or Blue according to
each setting.
y
Luminance: This function displays
calculated luminance value for 2.2 gamma.
You can input luminance value you want at
100 IRE, than the target luminance value
for 2.2 gamma is displayed at every 10
steps from 10 IRE to 90 IRE.
y
Red/Green/Blue: The adjustment range is
-50 - +50.
59