Modifying Ldap Configuration - Hitachi 3080 Network Administration Manual

The following commands are available:
• nis-ldap-mode - this command selects whether the server uses NIS
• nis-state - this command enables and disables the NIS client (the NIS
• ldap-server - this command displays and configures the servers which
• ldap-stats - this command displays statistics describing the response
• ldap-security - this command displays and sets the LDAP parameters
• lap-schema - this command displays and sets the LDAP client settings for

Modifying LDAP configuration

To change the current LDAP configuration settings
Procedure
1.
2.
3.
4.
66
servers only or LDAP in order to satisfy NIS queries
client also must be enabled in order to use LDAP)
are available for the LDAP client to contact
latency of LDAP servers for different NIS (RFC 2307) request types
schema selection
Navigate to Network Configuration > NIS/LDAP Configuration.
Click modify.
Modify the settings as described in the table below:
Field / Item Description
Domain Enter the name of the LDAP domain for which the system is a client.
Username This field contains the username of the Administrator for the LDAP servers.
The name can be up to 256 characters in length.
However, if it includes spaces, the name must be enclosed in double quotes.
For example: cn="Directory Manager",dc=example,dc=com
Password This field contains the password that corresponds to the username.
TLS Enabled Select this option in order to enable Transport Layer Security which provides
secure communication with the LDAP server.
Schema This field contains the name of the schema to use.
The options are:
• RFC-2307
• MS Services for Unix
• MS Identity Management for Unix
Click apply.
Note: This option supports both registered and anonymous user
logins.
Configuring name and directory services
Hitachi NAS Platform Network Administration Guide