Parking Mode; G-Sensor / File Protection - Motorola MDC10W User Manual

6.3

Parking Mode

Your MDC10W can record footages of events
occurring when your car is parked with its engine
off. The built-in battery will keep the G-sensor of
your device in detection mode, and will start
recording automatically for 30 seconds if it
detects vibration or a shock. Parking mode can
only record and save footage after an event has
been detected by the G-sensor.
IMPORTANT!
Parking mode is disabled by default.
To enable parking mode, tap
Dashcam app > Dashcam settings > Parking
mode.
6.4

G-sensor / File Protection

Your MDC10W is equipped with a G-sensor that
detects shocks. Each time an impact is detected,
it will lock the recording during which the event
occurred and prevent the loop recording from
being overwritten.
The sensitivity is set to Low by default, but can
be set to Off/High/Medium/Low. A Low setting
means it requires the most impact to trigger the
'locking' of recordings, while a High setting
requires the least impact to trigger the 'locking'
of recordings.
Main features and Settings
in Hubble
23