Cisco catalyst 6500 series Configuration Note page 188

Content switching module
Hide thumbs Also See for catalyst 6500 series:
Table of Contents

Advertisement

System Messages
Error Message CSM_SLB-3-OUTOFMEM Module [dec] memory error
Explanation
to more serious operational problem in the CSM if it persists.
Recommended Action
Error Message CSM_SLB-3-PORTCHANNEL Portchannel allocation failed for module [dec]
Explanation
configured or the slot number where the module was inserted was higher than anticipated.
Recommended Action
Error Message CSM_SLB-3-RELOAD Module [dec] configuration reload failed
Explanation
online. The cause of the problem may be the CLI error checking of the CSM.
Recommended Action
mismatch.
Error Message CSM_SLB-3-UNEXPECTED Module [dec] unexpected error
CSM_SLB-3-REDUNDANCY Module [dec] FT error
CSM_SLB-4-REDUNDANCY_WARN Module [dec] FT warning
CSM_SLB-6-REDUNDANCY_INFO Module %d FT info
CSM_SLB-3-ERROR Module [dec] error
CSM_SLB-4-WARNING Module [dec] warning
CSM_SLB-6-INFO Module [dec] info
Explanation
are located in the information string.
Recommended Action
Error Message CSM_SLB-3-VERMISMATCH Module [dec] image version mismatch
Explanation
occurs with the MFSC software versions before the 12.1(8)EX release or CSM software versions
before the 2.1(1) release.
Recommended Action
the CSM to come online.
Error Message CSM_SLB-4-ARPCONFIG Module [dec] ARP configuration error
Explanation
Recommended Action
Catalyst 6500 Series Content Switching Module Configuration Note
B-2
This a general memory problem of the control module. The memory problem may lead
Run a memory check, or increase the memory size.
This problem occurs when there are more CSM modules inserted into the chassis than
Move the CSM module to a lower slot number to resolve the problem.
The MSFC could not reload the existing configuration into the CSM module that came
Check the status of the CSM module such as diagnostic failure or version
These messages are generic headlines for error or warning messages. Additional details
None.
This is a version mismatch between MFSC and the CSM code. This condition only
Upgrade or downgrade the MFSC version to match the CSM version to allow
There is an error in creating or removing static ARP configuration.
Recheck your ARP configuration.
Appendix B
Troubleshooting and System Messages
OL-4612-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6000 series

Table of Contents