Contrast / Brightness / Sharpness / Color /
Tint (G/R)
m MENU →
Picture
→ E
Your product has several options for adjusting picture quality.
― When you make changes to Contrast, Brightness, Sharpness,
will be adjusted accordingly.
― You can adjust and store settings for each external device you have connected to an input
on the product.
― Lowering picture brightness reduces power consumption.
Color Temperature
m MENU →
Picture
→
Color Temperature
Adjust the color temperature (Red / Green / Blue). (Range: 2800K–10000K)
― Enabled when
Color Tone
is set to Off.
― If
Picture Mode
is set to Calibration,
Color
or
Tint
(G/R), the OSD
→ E
Color Temperature
is disabled.
White Balance
m MENU →
Picture
→
White Balance
→ E
2 Point
Adjust the color temperature for a more natural picture.
•
R-Offset
/
G-Offset
/ B-Offset: Adjust each color's (red, green, blue) darkness.
•
R-Gain
/
G-Gain
/ B-Gain: Adjust each color's (red, green, blue) brightness.
•
Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•
Off
/
On
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Suitable for environments where videowall display are used.
― Some external devices may not support this function.
― Enabled when
Picture Mode
is set to
Office & School
(Video/Image).
59