Disassembly
1
Presser foot adjusting screw / Presser foot holder assy / Presser bar
1. Remove the presser foot adjusting screw to remove the presser bar spring from the presser bar.
2. Remove the screw (set screw) to remove the presser foot holder assy.
3. Remove the screw (set screw, socket (CP) M4x8). Pull out the presser bar to remove the presser bar
bracket.
*Assembling note
• Fully tighten the screw after performing
Presser foot adjusting screw
Presser bar spring
Presser bar bracket
Set screw, socket (CP) M4x8
Presser lifter shaft assy
Presser foot unit
"Presser bar height
Presser bar
Set screw
Fig. 2-1
2 - 22
adjustment".
Set Screw
Set Screw, Socket (CP) M4X8
Presser foot holder assy