Connecting To A Wireless Router; Wps Button - D-Link mydlink DCH-S150 User Manual

Wi-fi motion sensor

Hide thumbs Also See for mydlink DCH-S150:

Table of Contents

Section 4 - Connecting a Wireless Client

Connecting to a Wireless Router

WPS (Wi-Fi Protected Setup) is a simple and secure way to connect your DCH-S150 to your network. Please refer to the user

manual for the wireless router you want to connect to make sure you understand how to enable WPS. Once you know, follow

the steps below:

WPS Button

Step 1 - Press the WPS button on the DCH-S150 for about 1 second. The LED on the device will start to blink.

Step 2 - Within 120 seconds, press the WPS button on your wireless device.

Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and

your wireless connection will be secured with WPA2.

D-Link DCH-S150 User Manual

Table of Contents