Page 2
Initial release Please read this manual before you use this product. This manual is based on the production version of LST-200/2200 FWT. Software changes may have occurred after this printing. without LGIC reserves the right to make changes in technical and product specifications...
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Table of Contents 1. Before You Start ....................6 Safety Information ..........................6 Optimal Phone Performance......................6 Care and Service..........................7 2. Introduction......................8 Front View of the Terminal........................ 9 3 LEDs Indicators ........................... 10 Installation ............................
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off immediately and remove the backup battery and AC power supply. If the unit is inoperable, then return to the service agent for service.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Congratulations on your purchase of the LG Fixed Wireless Terminal that has been designed to operate on the latest digital mobile communications technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide various advanced features.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Front View of the Terminal PHONE DC12V RS-232C Antenna Connector POWER SIGNAL MODE < Figure 1 > ITEM DESCRIPTION ¨ ç LEDs Indicate the status of the unit ¨ è DC-12V AC Power Adapter ¨...
LGIC CDMA Fixed Wireless Terminal LST-200/2200 3 LEDs Indicators POWER SIGNAL MODE COLOR Operating Condition GREEN-solid DC Power is applied POWER LED YELLOW-solid Battery Power is applied RED-solid Low Battery GREEN-solid Good Signal YELLOW-solid Poor Signal SIGNAL LED RED-solid No Service Area GREEN –...
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Installation STEP I. Check Components Each standard unit comes with the Fixed Wireless Terminal, an AC power supply with power cords, an antenna, a Battery and User Manual. Please make sure that these components are present and check for evidence of shipping before you begin the unit installation.
Page 11
LGIC CDMA Fixed Wireless Terminal LST-200/2200 and the wall; 5. Place the bracket over the two screws so that the screw head protrudes out of the opening; 6. Slide the bracket downward until the screw head is locked at the top of the opening and the bracket is secure;...
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Power On 1. The POWER LED indicates the presents status; 1) Using AC Adapter : Solid Green 2) Using internal battery : Solid Yellow 2. If the radio service is not available or radio signal is too weak to detect;...
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Emergency Call When emergency call number is connected once, it will not be terminated unless the called party disconnects the call(Emergency Call Hold Service). Therefore even caller hangs up the phone, the line will be still connected, so if the caller picks up the phone again, he can continue talking.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 Hookflash When the terminal receives a hookflash from the connected telephone device, it will automatically allow: For producing dial tone again after a phone number has been dialed without connection. The use of special cellular services which may be available in your cellular service area.
Please contact your cellular service provider for more information on using Voice Mail. Caller ID – LST-200/2200 can support Caller ID service if you have a telephone with Caller ID feature. Please contact your cellular service provider for more information on using this service.
5. Press “*” key to save and you will hear confirmation tone. Speed Dial LST-200/2200 has 30 memory locations (1~30:1 or 2 digits) to store frequently used phone numbers and you can make a call by pressing memory location number only when the speed dial feature is enabled.
3. Press speed dial number and wait for dial timeout or press “ #” . Emergency Call LST-200/2200 has 3 emergency call numbers (1~3) and max. 32 digits can be stored in each emergency call number. Entering the emergency phone number 1.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 3. Press “*” to save. Disable the Hot Line Feature 1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode. 2. Press “#” and Hot Line Disable code “ 2” . 3. Press “*” to save.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 If Alarm is disabled and time has been already programmed, you can make enable Alarm feature by pressing “#’ +”#”+”4”+”#”+”1”+”*” without entering alarm time again. Volume Level There are three voice volume levels to be controlled by software, and you can set the level to the adequate conversation volume.
LST-200/2200 G3 FAX Receive Mode To receive a Data Fax call by G3 FAX connected to your LST-200/2200 terminal from the other devices (Land or Mobile Data Fax), your service provider should support wireless data FAX. And the LST-200/2200 mode should be changed to G3 FAX receive mode to change data path from RS-232C to G3 FAX machine.
LGIC CDMA Fixed Wireless Terminal LST-200/2200 In the event you are unable to place or receive telephone calls, first check the appropriate power indication on the LED. In case of no power, check the wiring connections between the power outlet and the terminal. Check for the appropriate service indication on the LED. If an adequate signal is not present, try different locations for the better signal reception.