Operating The Unit Without Using The Controller; Connecting External Equipment To Enjoy Music - Panasonic EP-MR30 Operating Instruction

OPERATING THE UNIT WITHOUT USING THE CONTROLLER

You can operate the unit by using the unit operation button on the unit even if you lose the controller or the batteries in the
controller are dead.
1
Press the unit operation button.
Pressing the unit operation button changes the course
setting in the following order.
"Relax" Course
"Refresh" Course
"Comfort" Course
Off

CONNECTING EXTERNAL EQUIPMENT TO ENJOY MUSIC

You can connect an external music source, including CD and digital audio players, to the unit. Doing so allows you to listen to
the music you like and enjoy the bass waves generated by the sound of that music.
1
Insert the plug of the external music source into the
"AUX" terminal of the unit.
• When you insert the plug, the sound from the external music
source is automatically used by the unit. If you want to switch
back to the preinstalled music, press the OFF button on the
controller to stop operation. Then, select the course again.
• Before connecting the plug, turn down the volume on the
external music source. After connecting it, adjust the volume to
the desired level using the external music source controls and/
or the controller.
NOTE
• The "AUX" terminal of the unit is compatible with stereo mini-jack (diameter: 3.5 mm).
• A cord for this purpose is not included with this product. Purchase a cord that is compatible with the external music
source.
• We do not guarantee sound quality because the speaker is located under the cushion in the unit. Note that the
sound quality is different from that of an ordinary audio device.
HOW TO USE
GB18