4. Tap anywhere else on the screen to exit the editing mode.
5. The values that can be changed are:
To configure a WWAN network, tap the View Network Settings button. To configure the
WLAN connection use the
Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
•
Threshold - The signal strength (in dBm) before roaming can occur to this
connection. The default is -93 dBm.
•
Dwell - The length of time (in seconds) to wait before attempting the connection.
The default is 10 seconds.
•
Connect Attempts - The number of times this connection is tried. If there is no
successful connection after this many tries, the next connection is tried.
WLAN Wireless Configuration Utility
(WCU).
239