Siemens HiPath 8000 Administrator's Manual page 86

administration.fm
Administration
Multiline Appearance/Keyset
For the configuration of line keys, the use of the DLS (Deployment Service) is recom-
>
mended. For operating the DLS, please refer to the DLS user's guide. Alternatively,
the web interface or the local menu can be used. Note that the creation of a new line
key and the configuration of some parameters can not be accomplished by the pho-
ne's local menu.
The Realm, a protection domain used for authenticated access to the SIP server, works as a
name space. Any combination of user id and password is meaningful only within the realm it is
assigned to. The other parameters necessary for authenticated access are User Identifier and
Password. For all three parameters, there must be corresponding entries on the SIP server.
The Shared type parameter determines whether the line is a shared line, i. e. shared with other
endpoints, or a private line, i .e. available exclusively for this endpoint. A line that is configured
as primary line on one phone can be configured as secondary line on other phones.
When Hidden line is set to „true", the line will not be visible in the line overview on the phone's
display.
Data required
• Key label <n>: Set the label of the line key with the key number <n>.
• Primary line: Determines whether the line is the primary line.
• Line short description: Description of the line.
• Ring on/off: Determines whether the line rings on an incoming call.
• Ring delay: Time interval in seconds after which the line starts ringing on an incoming call.
• Selection order: Priority assigned to the line for the selection of an outgoing line.
• Address: Address/phone number which has a corresponding entry on the SIP server/
registrar.
• Realm: Domain wherein user id and password are valid.
• User Identifier: User name for authentication with the SIP server.
• Password: Password for authentication with the SIP server.
• Shared type: Determines whether the line is a shared line (shared by multiple endpoints)
or a private line (only available for this endpoint).
Value range: „shared", „private", „unknown".
• Hidden line: If set to „true", the line does not appear in the phone's line overview.
Value range:
A new line key can only be added by use of the WBM or, preferably, the DLS. Once
>
a line key exists, it can also be configured by the local menu.
3-50
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual