HP xw4600 Quickspecs page 17

QuickSpecs
System Technical Specifications
SMBIOS
Memory Change Alert
Thermal Alert
Remote ROM Flash
ACPI (Advanced
Configuration and Power
Management Interface)
Ownership Tag
Remote Wakeup/Remote
Shutdown
ASF 2.0 Compliant
Instantly Available PC
(Suspend to RAM - ACPI
sleep state S3)
Remote System Installation
via F12 (PXE 2.1) (Remote
Boot from Server)
ROM revision levels
System board revision level
Start-up Diagnostics
(Power-on Self-Test)
Industry Standard
Specification Support
Industry Standard
ACPI
ASF
CD Boot
EDD
EHCI
PCI
PCI Express
PMM
System Management BIOS 2.5, previously known as DMI BIOS, for system management information
Alerts management console if memory is removed or changed
Monitors the temperature state within the chassis. Three modes:
NORMAL - normal temperature ranges
ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to avoid
shutdown or provide for a smoother system shutdown
SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the computer
without warning before hardware component damage occurs
Provides secure, fail-safe ROM image management from a central network console
Allows the system to enter and resume from low power modes (sleep states)
Controls system power consumption, making it possible to place individual cards and peripherals
in a low-power or powered-off state without affecting other elements of the system
Supports ACPI 2.0 for full compatibility with 64-bit operating systems
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen
System administrators can power on, restart, and power off a client computer from a remote
location.
Enables cost-effective power consumption when the administrator needs to distribute software,
perform security management, or update the ROM.
Allows workstation status to be monitored on a remote console.
Allows for very low power consumption with quick resume time
Allows a new or existing system to boot over the network and download software, including the
Identifies system ROM revision levels and reports in Computer Setup Utility (F10).
Allows management SW to read revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified
Advanced Configuration and Power Management Interface, Version 2.0
"El Torrito" Bootable CD-ROM Format Specification Version 1.0
Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0
Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0
PCI Local Bus Specification, Revision 2.3
PCI Power Management Specification, Revision 1.1
PCI Firmware Specification, Revision 3.0, Draft .7
PCI Express Base Specification, Revision 1.1
PCI Express Base Specification, Revision 2.0
POST Memory Manager Specification, Version 1.01
DA - 12792 Worldwide — Version 25 — September 15, 2009
operating system
Yes
Revision Supported by the BIOS
Alert Standard Format Specification, Version 2.0
HP xw4600 Workstation HP xw4600 Workstation HP xw4600 Workstation HP xw4600 Workstation
Page 17